振动筛外文资料及翻译
毕业设计(外文翻译)
题 目:标准筛振筛机的总体及夹紧装置的设计
系 别 航空工程系
专业名称 机械设计制造及其自动化
班级学号 078105332
学生姓名 徐立轩
指导教师 罗海泉
二O一一 年三月
COAL PREPARATION
TABLE 7-14. Effect of Geometry and Concentration of Feed Solids on throughput
for a 1/6-in, diam hydro cyclone cleaning 1/4-in
Varying the distance between the bottom of the vortex finder and the hydro cyclone
cone bottom. For example, the washed coal ash can be reduced by decreasing the diameter
of the vortex finder, decreasing the length of the vortex finder, or increasing the diameter
of the underflow orifice. Increasing feed-Solids content increases the specific gravity of
separation and, therefore, washed coal yield and ash, which indicates the importance of
maintaining a constant feed-solids content to preserve washed coal quality.
Capacity is influenced by cyclone geometry, i.e., the sizes of the overflow,
underflow, and inlet openings, and by feed-solids content. The effects of these parameters
is given in Table 7- 14.Increasing inlet pressure is a simple method of increasing capacity
without changing hydro cyclone geometry, and washed yield and ash are not significantly
affected. However, the penalty is increased pumping cost, and degradation of the coal.
Flow sheets
标签: #翻译
摘要:
展开>>
收起<<
毕业设计(外文翻译)题目:标准筛振筛机的总体及夹紧装置的设计系别航空工程系专业名称机械设计制造及其自动化班级学号078105332学生姓名徐立轩指导教师罗海泉二O一一年三月COALPREPARATIONTABLE7-14.EffectofGeometryandConcentrationofFeedSolidsonthroughputfora1/6-in,diamhydrocyclonecleaning1/4-inVaryingthedistancebetweenthebottomofthevortexfinderandthehydrocycloneconebottom.Forexample,t...
相关推荐
-
2024年党建工作要点工作计划5篇与2024年党建工作计划[7篇] 供参考
2023-12-20 301 -
医院基本情况简介概述范文
2024-02-20 191 -
2024年党建工作总结及2025年工作计划2890字范文
2024-11-11 714 -
两篇:2024年党建工作总结和2025年工作计划范文稿
2024-11-11 771 -
2024年(2篇文)党建工作总结及2025年工作计划稿
2024-11-11 282 -
2024年全面从严治党和党风廉政建设工作总结文稿3篇
2024-12-20 233 -
2篇全面从严治党和党风廉政建设工作总结范文稿
2024-12-20 282 -
2024年全面从严治党和党风廉政建设工作总结(2份)供借鉴
2024-12-20 211 -
【合编2篇】2024年全面从严治党和党风廉政建设工作总结文稿
2024-12-20 191 -
2024年全面从严治党和党风廉政建设工作总结范文稿2篇【供参考】
2024-12-20 212
作者:闻远设计
分类:课程设计课件资料
价格:15光币
属性:11 页
大小:834KB
格式:DOC
时间:2023-09-29

